5.8 GHz Dual Polarized 18 dBi Long Range WiFi Antenna
Long Range WiFi Antenna
Factory price
All weather operation
Included Mounting bracket
Heavy-duty UV-Resistant Radome
Ameison 5.8 GHz Dual Polarized 18 dBi Long Range WiFi Antenna
Model No.: AMXP-5800VH-D18L60
Superior Performance
AMXP-5800VH-D18L60 Flat Panel WiFi Antenna combines vertical and
horizontal polarization with high gain overmultiple frequencies in
a single enclosure. It is a professional quality antenna designed
primarily for MIMO point-to-multipoint and point-to-point
applications in the 5.8 GHz frequency bands.
This antenna incorporates advanced dual polarization technology
that allows for the
interoperability of two radios to transmit and receive paths. This
technology allows for the attenuation of unwanted signals from
adjacent channels and/or co-located equipment.
Rugged and Weatherproof
This aesthetically pleasing antenna features a heavy-duty
UV-resistant plastic radome ideal for all-weather indoor
and outdoor operation. The AMXP-5800VH-D18L60 antenna is supplied
with a tilt and swivel mast mount kit.
This allows quick installation at various degrees of up/down tilt
for easy alignment.
Standard Warranty: 1 Year
SPECIFICATIONS
Frequency Range: 5725-5850 MHz
Gain: 2*18 dBi
VSWR: < 1.5: 1
Polarization: Vertical & Horizontal
Vertical Plane Half Power Beamwidth: 7°
Horizontal Plane Half Power Beamwidth: 60°
Front to Back Ratio:>25 dB
Impedance: 50 Ω
Maxium Input Power: 100 W
Connector: Integral 2-N Female Connector
Dimension(L/W/D): 405*140*28 mm
Racome material: ABS
Lightning Protection: DC Ground
Weight (Approx.) including mounting bracket: 1.0 KG
Mounting Bracket: U Type clamp with bracket suitable for 30-50 MM
diameter pole
Features:
MIMO - Multiple-Input and Multiple-Output
Dual Polarity feed system in single enclosure
Two integral N-Type Female Connector
UV-resistant radome for all-weather operation
Applications:
5.8GHz UNII applications
5.8GHz ISM applications
5.8GHz Wireless LAN systems
WiFi Systems & Wireless Video Systems
Wireless Internet Provider "cell" sites
Two important things to consider when you get an antenna:
The first thing is that you get yourself a suitable antenna. The
antenna needs to cover the frequency band your provider is using
and the antenna needs to have reasonable strength (called “gain”).
To be flexible, ideally the antenna has a high gain across all
possible frequency bands in question. Most of Ameison’s mobile
broadband antennas cover all relevant frequency bands from 860 –
2200 MHz, and therefore will suit any available provider. Often you
can find some low price “high gain” antenna, only to discover that
it does not work well for your case. Sometimes it is quite tricky
to find out antenna gain over different frequency bands, , because
antenna companies who provide these cheap “high gain” antennas will
not give this information. The only way to find out is a datasheet,
which actually shows the gain of the antenna across the whole
frequency band as a graph.
The second thing is to get the antenna outside or at least as close
to the window as possible. This is extremely important. Walls eat
signals. You may know this from your own experience. Stand inside a
well-built house with lots of steel and concrete around you and you
will notice that while talking on your mobile phone the connection
gets worse while you move deeper into the building and better when
standing next to the window (or hanging out of the window….)
Hong Kong Head Office: FOXTENNA COMMU LTD
ChinaFactory: Shenzhen Ameison Communication Equipment Co.,Ltd.
Factory Address:33-2#,Fajiafu Industrial Zone, Shantangwei, Pingdi,Longgang,
Shenzhen, P.R.China.
Zip:518117
Tel:+86-755-8408 9372
Fax:+86-755-8991 4746
Mobile:+86-183 190 28418
Skype:michael18883
